Digital I/O cable for NETIMPRESS next AZ401 and Digital I/O cable for NETIMPRESS avant OCX120 have the same specifications, so they can be used interchangeably.
＜Specification changes in NETIMPRESS avant＞
The number of script files that can be selected is increasing due to the expansion of the script file selection signal.
Next: 32 ways
Avant: 256 ways
Change of pin assignment
NETIMPRESS next 7pin-9pin RSV (NC)
NETIMPRESS avant 7pin-9pin Digital I/O ST5-ST7 (script selection signal)
* The jig created for NETIMPRESS next Digital I/O can be directly connected to NETIMPRESS avant for operation.
* In NETIMPRESS next, pins 7 to 9 of RSV are not connected to the internal circuit of the writer, so even if the jig created for NETIMPRESS avant is connected to NETIMPRESS next, the circuit on the jig side will not be adversely affected.
Script files created with AZ488 (Script File Generator) can be used for both NETIMPRESS next and
NETIMPRESS avant. (There are no changes in the script file specifications.)
＜Specification changes in NETIMPRESS avant＞
The number of script files that can be selected is increasing due to the expansion of the script file selection signal.
Next: 32 ways
Avant: 256 ways
Change of pin assignment
NETIMPRESS next 7pin-9pin RSV (NC)
NETIMPRESS avant 7pin-9pin Digital I/O ST5-ST7 (script selection signal)
* The jig created for NETIMPRESS next Digital I/O can be directly connected to NETIMPRESS avant for operation.
* In NETIMPRESS next, pins 7 to 9 of RSV are not connected to the internal circuit of the writer, so even if the jig created for NETIMPRESS avant is connected to NETIMPRESS next, the circuit on the jig side will not be adversely affected.
Script files created with AZ488 (Script File Generator) can be used for both NETIMPRESS next and
NETIMPRESS avant. (There are no changes in the script file specifications.)