When the Flash ROM area and the device function execution area or buffer area do not match*, an LCD message will be displayed when the programmer starts up.
*This occurs when the following address ranges do not match on the SWX600 screen:
• "Flash ROM Area" in [Parameter Table 1]
• "Device Function" or "BufferArea" in [Basic Operation]
If you have intentionally changed these, there is no problem, and you can continue to use it as is.
You can hide it using the following methods:
• SWX600 (Ver1.32 or later) - [Parameter Table 1] - Set "Address Warning Area" to "OFF" and press the OK button on the right side of the screen to save.
This setting is saved for each selected YIM folder.
• Set to OFF in the AFX100's main menu operation "WARNING DISP:AREA".