[Supported model]
adviceLUNA, adviceLUNA2
[Scope of application]
ARM Cortex
[Error message]
ICE Error No.F49: Debug target core is not found.
[Workaround]
- In the case setting the fixed value for “APSel (0-255)” of MPU-specific settings, the value may be wrong.
Set the correct setting by reading to Section 25.2 “CoreSight Setting Guide”.
- Implement (ROM table entry or preamble/DEVTYPE of debug core) of chip maker may not correct.
Contact the chip maker.
- JTAG/SWD clock frequency may too high.
Low down “JTAG/SWD clock of MPU-specific setting.
[Cause]
This error is output when debug target core is not found in the APB (AHB) which is specified by “APSel (0-255)” of MPU-specific settings.
This error occurs only for Cortex core.