[Supported model]
adviceLUNA, adviceLUNA2
[Scope of application]
microVIEW-PLUS
[Error message]
ICE Error No.907: Target Power OFF
[Cause]
(1) This error occurs if the user system power OFF is detected. This error message appears if the user system power is OFF.
(2) The user system power or other terminal may not be connected to the connector pin assigned to the power monitor or the contact may be faulty.
(3) The ICE in use may not support the power voltage of the user system.
[Workaround]
(1) Check that the user system power is ON.
The ICE does not function when the user system power is OFF.
After turning ON the power, always issue the RESET.
If you turn OFF the user system power intentionally during debugging, the error message is only displayed and this is not a problem.
(2) Check the wiring.
(3) Refer to the ICE User's Manual.