[Supported model]
adviceLUNA, adviceLUNA2
[Scope of application]
ARM ETM
[Error message]
ICE Error No.F14: Half-rate clocking is not supported.
[Cause]
This error is output when the MPU you are using does not support Half-Rate Clocking feature.
You cannot use the Half-rate clocking function unless ETM implemented in your MPU supports Half-Rate Clocking feature.
[Workaround]
1. Choose [MPU] - [ETM Control] from the menu bar of the microVIEW-PLUS.
Check if Half-Rate Clocking is listed as “Supported” on the [Sys. Config.] tab.
2.Check with a manufacturer of the MPU you are using.