[Supported model]
adviceLUNA, adviceLUNA2
[Scope of application]
ARM
[Error message]
ICE Error No.903: Invalid Processor Unit
[Cause]
This error is shown when the hardware configuration of ICE registered in the ICE internal firmware is different from the actual hardware configuration of ICE.
BUSY LED blinks in red when this error occurs.
[Workaround]
The connection may be loosen. Check to make sure that the JTAG connector of ICE (Latch for connecting the JTAG flat cable) is not damaged.
- If the connection has no problem, reinstall the MPU system by using APClient.
If the problem is not corrected even after doing the above workaround, the unit may be broken.
Please contact our support center.