[Scope of application]
ARM
[Error message]
ICE Error No.F17: You cannot select Stall Processor, as it is not supported.
[Cause]
This error is output when the MPU you are using does not support FIFOFULL function.
You cannot execute Stall Processor unless ETM implemented in your MPU supports FIFOFULL feature.
[Workaround]
- Choose [MPU] - [ETM Control] from the menu bar of the microVIEW-PLUS.
Check if FIFOFULL is listed as “Supported” on the [Config.] tab.
- Check with a manufacturer of the MPU you are using.