[Scope of application]
adviceXross, adviceLUNA II, adviceLUNA
[Information]
For adviceXross/adviceLUNA II/adviceLUNA for Arm, you can change the drive strength of TCK signal sending from ICE as a maintenance function.
By using this function, you can improve the quality by correcting the deterioration quality of JTAG signal by noise.
If you want to change the drive strength of TCK signal, select [MPU] [MPU-specific settings] [Maintenance], and select [TCK driver settings] from debugger menu.
| Driver setting value | TCK drive current | Use conditions |
| 0 (default) | 12mA | When using JTAG probe like HMX600JP, H2X600JP |
| 0 (default) | 24mA | When using trace probe like HMX600TP, H2X600XP |
| 1 | 12mA | The drive current does not depending on the probe in use. The set value is used. |
| 2 | 24mA | ↓ |
| 3 | 16mA | ↓ |
| 4 | 36mA | ↓ |
| 5 | 28mA | ↓ |
| 6 | 40mA | ↓ |
| 7 | 52mA | ↓ |